14 Companies Doing An Excellent Job At Repair Patio Door Lock

How to Repair a Bad Patio Door Lock

A secure patio door is vital to ensure your home's security. It can be frustrating when it isn't easy to lock.

In most cases, a stubborn lock is the result of the wrong alignment or just wear and tear. It's possible to fix the function of the lock by adjusting or lubricating it. If these troubleshooting methods fail, you may replace the mortise lock and handle.

Clean and Lubricate

A door lock may become difficult to open and close because of dust, dirt and grime. Regular cleaning and lubrication can help to prevent your security device from becoming stiff or stuck. This will help you save money on repair costs and prolong the lifespan of your door.

To begin, you'll have to clean the lock cylinder. Use WD-40 or another penetrating spray to complete this. Spray a small amount oil into the keyhole and then turn the key to distribute the oil. Do not use solvents like household oil or other which could damage your locks. Spray a small amount on the key.

When your lock's cylinder is clean, it's time to lubricate. You can use a silicone spray or dry lubricant such as graphite powder. Graphite powder lasts for a long time and doesn't swell up like liquid lubricants, so it's a great choice for lubricating sticky locks. Silicone sprays can be able to withstand temperatures that are below freezing and are impervious to water. However, they may need multiple coats in order to be effective.

You can also use a de-icer spray that is specially designed for cold weather. It will melt the frost and ice from the mechanism of your lock. This will help you unlock your lock, and then relock it more easily.

How often you need to oil your locks will be contingent on environmental factors. The location of your door will impact its performance. A location near the coast could expose the door to salty air, which can cause corrosion. The most common rule of thumb is to oil your locks at least twice a year, or more frequently when you live in an area that experiences harsh weather conditions. Lubricating your locks can save you money on repairs and ensure that your patio door will function properly for the years to come.

Reposition the Lock Cylinder

If your patio door lock isn't functioning correctly, it could indicate that one or more components are damaged or misaligned. Regular inspections and timely repairs of a broken lock on your patio door can prevent further damage and ensure the security of your doors. You can repair the patio door that is locked or unlocked by tightening loose screws, adjusting the lock mechanism or replacing the lock cylinder.

Start by checking the exterior and the interior of the lock to see whether there are any indications of damage or misalignment. The majority of local patio door repairs door locks expand and contract during warm or cold weather, and can shift slightly over time. This slight shift can cause the locking mechanism to not align properly and cause problems when opening or closing the patio door.

Then, look over the lock cylinder to find any obstructions in the keyway hole. If the lock is corroded or blocked, the cylinder may be difficult to open and can cause damage to the cam, latch springs, or the lock pins. If the cylinder isn't easy to insert, you may be able of removing any obstructions with the help of tweezers or a picklock. If the issue persists, you may need to remove the cylinder and disassemble it to find the source of the obstruction.

If the lock cylinder isn't screwed into the lock body you can loosen it by removing the screw that is flat inside the faceplate of the cylinder. This screw will allow you to rotate the cylinder and may even help restore the proper alignment.

Examine the cylinder for a small tab that moves up and down using the key, typically towards the very end. This little clip, also known as a "release tab" is what keeps the cylinder from sliding all the way into the lock body. The tab can be moved back using a standard key to allow the cylinder to be taken out and then reinserted.

If your lock cylinder is stuck, you may be able restore proper alignment by rotating it until the latch bolt engages with the strike plate, and the knob or handle can be pushed into and withdrawn. Reassemble the lock once you have restored proper alignment. Test it for functionality. If your patio door lock is still difficult to use, it's a sign that a different component, such as the latch spring or latch is damaged or worn and will need to be replaced.

Make sure you tighten the Screws

Patio door locks can be damaged by regular use, extreme temperatures, dirt and dust. If they are not properly taken care of these delicate components can get worn out and cause your door to fail to lock properly. Most lock problems are easily repaired with a few easy steps.

It is recommended to first clean the lock mechanism. Use a damp cloth remove any dirt or dust that might be present, and then dry the lock thoroughly. After cleaning, a small amount silicone-based lubricant will help keep moving parts running smoothly and efficiently. Avoid lubricants that have oil bases as they can attract dust and other debris, which can cause further problems.

If your patio door is equipped with a security footlock, ensure that the footlock is properly aligned with the strike plate. In most cases this will only require you to adjust the screws that attach your foot lock to the frame of the patio door. Loosen the screw using a Robertson screwdriver, and then gently push it up or down to adjust the foot lock if needed. After the adjustment has been completed then tighten the screw.

When it comes to repairing the handle of a patio door the most frequent issue is misalignment of the latch and strike plate. This could be due to everyday wear and tear, or the latch may be positioned above or below where it is supposed to be.

Then, take out the handle from the old one and locate the screws or bolts that hold it in place. Keep on track of the bolts or screws as you will require them for the installation of the new handle. Then, you can remove the old spindle, then slide the new one into position on the side of the door, ensuring that it is in alignment with the holes in the interior and exterior handles. Install the exterior and interior handles once the spindle has been installed. Make sure they are aligned correctly with the bolts or screws holding them in place.

Close and lock the patio door after you have made any adjustments that are required. If the door is properly aligned, companies it should be able to open and shut without needing any additional force. If you're still having problems you may have to move your strike plate or latch, or replace the lock cylinder.

Replace the Latch

If your patio door repair door locks still not working, it may be time to replace the lock. Replacing a lock is a moderately easy home improvement project that a majority of homeowners can complete themselves. Start by sliding the patio doors completely out and then removing your existing lock on the inside of the door. Study the existing lock to determine the type of lock you'll require.

Before installing the new latch, loosen the screws that secure the strike plate. This is the part of the lock mounted on the outside of the frame of the door. Adjust it either horizontally or in a vertical direction to align it with holes in the latch. After you've adjusted the strike plate, secure it in place and tighten the screws.

After all the parts of your patio door have been moved or replaced, you can reassemble them and secure them according to the instructions given by the manufacturer. After you're done, test the latch to make sure that it fits and is able to catch the latch hasp when the door is closed. If it does, your patio door lock has been installed correctly and is now ready to give you the security and privacy that you have come to expect.

Patio doors, like other components of your home, need to be aligned properly to work effectively. Over time, temperature, cold, dirt, and debris could cause the hinges and door frame to shift. If these components are not aligned, it's like trying to fit a key into the wrong keyhole it won't work. It is possible to fix an issue that appeared impossible by following these simple steps. Do yourself a big pat on the back for taking on the task and reclaiming the patio door track repair door's closed position! We're sure you won't have any more trouble opening or closing the door from now to the end. Best of luck! We're here to assist in case you require any assistance or have any questions.